epic bag.

Just a couple days until I return to Loon Lake in B.C. for another fabulous quilt retreat hosted by Krista.  I have a million things to do to get my house in order before then.  But instead, I decided I NEEDED to make a new bag.

Inspiration hit and nothing could be done- the world had to stop until I got it made.  I made some sketches and got to work.  And the longer I worked at it the more excited I became.  I nicknamed it the "Epic Bag" in some of my Instagram progress pictures, and I think the name has stuck.  Because this bag is epic, dudes.  It has all the elements I love- wonky patchwork. Bits and pieces of some favorite fabrics.  Little details. Fussy cutting. Hand stitching.  Great color mixed with fun low volume fabrics. Hardware and zippers.  Function.  And I think after years of frustration, I finally used the perfect amount of interfacing!  I am so pleased with myself (can you tell?).

The front panel was inspired by a flying geese block tutorial by Hyacinth Quilt Designs found here.  On the back, I added some random flying geese as well, and some fun hand stitching with Perle cotton.

A detail shot of the hardware tabs for the cross-body strap and some of the patchwork and random hand stitching for you!

I even used some favorite fabrics for lining.  Heather Ross pin people in the front zippered pocket....

...and some precious Anna Maria Horner Good Folks for my inner lining. The interior has two rows of slip pockets and another zippered one as well. I should have no excuses not to be organized!

The top of the bag has an inset zipper as well to close it securely.

Two sets of straps, so that it may be worn cross body like so, with the top folding over (cute, eh?)....

....or slung over my forearm.

I am thinking that I might draw up a pattern of this is there is any interest??  What do you think?

Pretty little purses

Once again, in my journeys on the Purl Soho site, I spotted an absolutely gorgeous Japanese handbag. But there was no way in tarnation that I was spending $36 for the frame in their shop. So I moseyed on over to etsy, and along with the bobble frames I used for my coin purses, I found iDENTical frames for...drum roll.....$5.80. See? I am a freakin' economic genius. You gotta spend money to save money, as my BFF Samantha says ;)

Did I NEED another purse? Well, that is an entirely different question in the economics department....

Anyways, back to the crafty stuff. The frames I bought came with no instructions, so I popped back to the Purl Soho tutorial and just eyeballed a pattern, based on what they showed there. It's a wrinkly bag, so I figured exact dimensions were not critical, and that turned out to be true. Sew sew sew, and here you have it:

Aren't they cute? I used some home deco weight Joel Dewberry from his Ginseng collection that I la-la-love, happened to find on clearance at a local fabric shop, and have been waiting for the right project to put to use. I think they are perfect here.

Now, I want you all to remain impressed with my crafty prowess and all, but I have to say- these were quite easy. And super elegant. So cute dangling over the wrist just so. I highly recommend giving these a try!

For lining, I used some sweet soft Rowan shot cotton. Made use of my labels once again.



What's that inside the bags? Well, I thought it would be nice to have a coordinating wallet that fit nicely in the bags, so I whipped up a couple of those as well, incorporating a third fabric from the same line.



This was just a pattern I made up, inspired by this clutch at Keyka Lou (though not nearly as cute), smaller in size and with a full fold over.

I used a magnet snap closure for the flap (also bought on etsy here), which was an interesting experience as when I was doing my top stitching, the magnet would stick to the metal base plate by my bobbin at the most unexpected times and make my lines all wonky. Doh! How very Me of me.


As you can see, I made 2 sets- one for me and one for Samantha, who lives in Toronto :-) I am super stoked as I am heading out to T.O. for the weekend with my hubby. He has a conference and it is our anniversary so I am tagging along (maybe some romance??? nudge wink) and while he is occupied by day, I get to hang out with Sam, who I never get to see often enough!! You can bet she and I will find equal doses of shopping, chocolate and trouble! I promise a full report when I get back!

Denyse Schmidt clutches

My quilting "to-do" list is looooong, but I just had to crack into some of that gorgeous new Denyse Schmidt fabric from JoAnn's. Couple that with my new obsession with framed purses, and here you have it:

I used the tutorial at U-handbag to make my own pattern, using these cute frames- love the aqua bobbles! In typical OCD style, I bought a mother-load of various frames on etsy here and here, so be prepared to be bombarded over the next weeks until I get this out of my system ;) Remember my embroidery hoops phase?? (here here here here here and here)

I simply love how these framed bags look, and the endless possibilities! These ones are 8 inches wide, the perfect clutch size, or can be thrown like a pouch into a bigger tote.


I lined each with coordinating fabrics from my stash, and included my new labels bought from Mommie Made It.


Not sure yet how I will slice the rest of these babies up, but Denyse did it again- these are truly pretty prints :-)

Lining up at Sew Modern Monday and Fabric Tuesday.

Bag Lady Week- Messenger Bag Tutorial

It's been a busy blogging week celebrating my favorite accessory, and I thought I would wrap it up with another tutorial. These bags made me so happy, I had to share the pattern. These are great, for business or pleasure. They are a bit more work than your average project (at least for me), so allow yourself about 3-4 hours to cut and complete. I think they are worth the effort!

There are 2 sizes. The "regular" messenger finishes up around 15" wide by 10" high and is 3" deep. Perfect for binders, clipboards or laptops:The "mini-messenger" is more purse-sized, measuring 9" wide, but is still 10" tall and 3" deep:
You will need:

For the "Regular Messenger":
2/3 yard outer fabric- such as wool, wool blends, suiting, canvas
2/3 yard of lining fabric- cotton quilting weight
2/3 yard of interfacing- I used fleece sew-in for a well padded heavier bag

For the "Mini-Messenger":
1/2 yard each of above

For both-
thread color of choice
2 buttons of choice
hardware for adjustable shoulder strap- 1 slider and 2 rings as shown (size 39mm/1.5"):

Cutting your pieces

"Regular Messenger":

Outer fabric pieces:
front and back panels- 15.5" by 10.5" (cut 2)
flap: 15.5" by 10" (cut 1)
back pockets: 15.5" by 9.5"
sides and bottom: 15.5" by 3.5" (cut 1 for back) and 10.5" by 3.5" (cut 2 for sides)
loops for rings : 3" by 2.5" (cut 2)

Lining fabric pieces:
front and back panels- 15.5" by 10.5" (cut 2)
flap: 15.5" by 10" (cut 1)
inner pockets: 15.5" by 6.5"
sides and bottom: 15.5" by 3.5" (cut 1 for back) and 10.5" by 3.5" (cut 2 for sides)
loops for rings : 3" by 2.5" (cut 2)
loops for buttons: 5" by 1.5" (cut 2)
Note- extend length of button loops if you are using very large buttons

Interfacing:
front and back panels- 15.5" by 10.5" (cut 2)
flap: 15.5" by 10" (cut 1)
sides and bottom: 15.5" by 3.5" (cut 1 for back) and 10.5" by 3.5" (cut 2 for sides)

Shoulder strap:
To make from fabric- cut 1 piece each of outer fabric and lining fabric
45" (or WOF) by 2.5"
OR
use 1-1/4" webbing (length 45")
OR
use a recycled belt, cut about 12" from where the strap attaches to the buckle
OR
get creative :-)

"Mini-Messenger":
Cut same pieces as above, but change all measurements that are 15.5" to 9.5"

Let's sew!
Note- all seams are sewn at 1/4", unless stated otherwise.
Additional note- please tolerate my sucky photos. I do most of my crafting in the wee hours of the night when my kids are in bed (no more nap times at my house!) so there is no natural light to be found. These are kind of washed out, but hopefully clear enough!
One Last thing- the following photos show the assembly of the mini messenger. Same rules apply for the big guy, just watch during the flap step that you put your button hoops on the long side of the flap fabric (not the short side).

1. Preparing the flap of the bag:
Take 2 button loop pieces. Fold over one long end 1/4". Press.

Now roll it up, rolling 3 times, from the other end, until it looks like this: Sew along the edge to close. Set aside. Grab flap piece of lining fabric and set it right side up. On top, put the outer fabric, right side down. Put your interfacing on top. Make a loop with the button loop pieces you just made, and insert them into the sandwich, loop inward, about 4" in from the outer corner (1.5" in on the mini). Depending on the size of button you are using, allow more or less length for the loop- I think it looks best if the loop is snug on the button. Pin loops in place. If you are adding a label to the flap as I have done, insert it as well, ensuring that the words are facing towards the outer fabric and not the lining. Sew along the 2 side and bottom ends. Clip corners, trim excess, and invert flap piece. Push out corners, and press. Do some top stitching to snaz it up. Set aside.
2. Preparing the lining:
Take pocket piece and fold over bottom 1/4'. Press. Fold over top length 1/4", press, then fold again 1/2" and press.

Sew along top only. I did 2 lines, one close to the folded edge and one 1/4' down.
Add a label if you would like (if doing the mini like shown here, add the label to the lining body, not the pocket).
Pin the pocket piece to the lining back piece, about 4" from the top.

Sew along bottom edge now to close pocket, close to the fold.

Sew vertical lines (I did double lines at 1/4" apart again, simply for style) to separate into pockets of the sizes you would like. In the regular messenger, I used 2 sets of lines equally spaced to make 3 pockets. For the mini, I divided it into 2 pockets, then added my label at this point, just above the pockets. Take the bottom piece of lining, place with right sides facing, and sew along raw edges.

Flip bottom piece aside, align 2 side pieces with right sides facing, sew.

Align corners. Sew.

Repeat to add front piece of lining. LEAVE A 6" SEGMENT OF THE BOTTOM OPEN IN THE LINING AS SHOWN. You will need this hole to invert your bag as one of the final steps. Set your lining aside.

3. Preparing the outer body:

Take pocket piece and fold over top 1/4", press, then fold 1/2" and press again (note- with some of the heavier wools, this may not press well). Stitch along fold, and again at 1/4".Align on back body piece such that bottoms are in line. Pin in place. If doing regular messenger, mark center and stitch to make 2 pockets, and stitch in place. (Note- the mini is shown here with 2 pockets, but I found them too narrow to stick your hand down...for the mini, one pocket works best, so skip this step!).

Assemble the outer bag much like you did the lining, only include the layer of interfacing on the wrong side of your outer fabric. Also, do not leave a hole- close all seams. Be aware that sewing through 2 layers of wool and 2 layers of interfacing is one mighty thick sandwich!!

Invert your outer bag. 4. Putting it all together
Make the loops for your shoulder strap rings by aligning pieces, right sides facing, and sewing along long sides. Invert, press, and top stitch along long sides. Set aside. Now it is time to attach the flap to the outer bag. Align prepared flap with outer side facing the back (pocketed) side of the outer bag, raw edges aligned. Pin, then sew. (Note- if you want to have the external pockets on the front under the flap, instead of on the back, then pin flap on opposite side. To-may-to, to-mat-o. You choose.)
Thread rings over loops:
Center loops (with rings inside) to sides of bag, on outside of bag with raw edges aligned. Pin and sew.
Grab your lining and invert. Slip over outer bag so that right sides are facing and the lining pocket is on the same side as the flap. Tuck flap and ring loops inside lining:
Sew all around top to close:
Remember that hole you left in the lining? Stick your hand through it and yank to invert this puppy!
Tuck the open edges of the lining in on itself and sew it closed.
Tuck all the lining nicely into the outer bag and press the seams. Top stitch around the top to help it stay nice and flat. Line up your button loops and hand sew on your buttons To finish the main body of the bag. You are almost done! Let's put on a strap.

5. Adding an adjustable shoulder strap:
Your strap can be made of the bag fabric, a recycled belt, or made of webbing. It you are making it from fabric, align pieces so right sides are facing, and stitch along length on both sides, leaving ends open. Invert the tube by attaching a safety pin to the lining fabric on one end, and snaking the pin through to the opposite end, working it with your fingers through the tube and pushing fabric back until the safety pin emerges on the other side:
Press, then top stitch along length at 1/4".

Take your strap and loop through the center portion of your slider. Sew into place as shown:

Take the other end and thread it through the ring (left side, if looking at bag from the front) as shown:Loop it up and in one end of the slider from underneath:

Loop it back over the other side and pull:

Bring the other end to the right loop and thread around as shown:

Tuck end in on itself and sew to secure as shown:

You did it! You are done! Let me hear you say "Oh yah!" And maybe just a little happy dance.....

I hope you have enjoyed the Messenger Bag Tutorial! I would love to see your beautiful bags, so please email me a photo or add one to my Flickr group! As always, my tutorials are intended for personal use only. Feel free to blog about your creations, but please be courteous and link back to this site so I can get credit for all my hard work and ideas. Happy sewing!